Mr RC Sound accessories

Mr RC Sound parts, including speakers, transducers, gun LEDs and wiring adapters for the V4 systems.  Safe and secure payments through PayPal.

Wiring adapters (Power 'Y' harness)

T-connector to JST male

If you use the popular T-connector, simply plug the battery into the left side of this pass through and connect the male side to the ESC lead, then connect the male JST connector to the Mr RC sound unit.

Price of the T connector to JST male- $6.99US plus $1.50 US for shipping

Safe and secure shopping with PayPal




XT60 to JST male

Use this connector if your system is using the XT60 connectors. Simply disconnect the battery from the ESC and plug the battery into one side of this connector and the ESC lead into the other. The JST male end goes directly the the sound card

Price of the XT60 to JST male connector- $6.99US plus $1.50 US for shipping

No worries when you shop with PayPal





Servo Leads


Special male to male leads (For V4 units only!- green PC board)

Price of the special male to male servo lead- $5.49US plus $1.00 US for shipping

Quick and easy shopping with PayPal

 

Please note that this lead is only required for the original V4 units. (The V4.1 does NOT require them)


Standard male to male leads

Standard male to male servo cable, used for all inputs on the V4.1 and V3 Sound Units. For V4, please use the modified servo cable above.

 Price of the standard male to male servo lead- $3.49US plus $1.00 US for shipping.

Quick and easy shopping with PayPal




Servo extension

A simple 30cm (11.8") servo extension lead

Price of the 30cm servo extension lead- $3.49US plus $1.00 US for shipping


Safe and secure shopping with PayPal




Amplifier/Regulator Upgrade


This brand new combo unit plugs in to the Mr RC Sound V4.1 module and also requires it's own power connection from the flight pack.For the largest of aircraft, this means you can now add 2 more Max-2 SPL speakers to your V4.1 system and have a total of 4 speakers. Volume output can be more than 112db at 1m!

Price of the Amplifier/Regulator Upgrade- $27.99US plus $6.00 US for shipping


 

Safety and security with PayPal

Now you can upgrade your V4.1 Base Module to a full V4 Ultra system, by buying this unit plus 2 more Max-2 SPL speakers or TT-25 transducers!



Mr RC Sound TT-25 Transducer

This transducer is an alterative to the Max2-SPL speaker.

No sound cheater holes are required, it produces similar volume levels and it is half the weight!

The complete airframe becomes the speaker!

It has a better base than the Max2-SPL and if used with a MR RC Sound V4.1 unit ( Red PC board) no choke is required. If used with the older V4 unit (Green PC board) the a ferrite choke is needed.

Price of the TT-25 transducer- $19.99US plus $3.00 US for shipping


 PayPal- the safest way to shop


 
Mr RC Sound Bass Transducer

The Bass transducer is used when you would like more bass sound. This unit is designed to supplement the standard TT-25 transducers. Only use one in conjunction with at least one other TT-25.

If you are using the Ultra configuration (4-transducers) then the use of one bass transducer will add that more realistic bass tone .DO NOT use a bass transducer on its own! You will lose the nuances of the upper tones.

Size- 2.25" diameter x 1" high.

Weight- 4.6 oz

Output-.1m tests show nearly identical output to the TT-25, but may sound slightly less because of the lower tones. 50' test show a slight 1-3db drop in overall volume over the TT-25, but the overall tone is lower.


Price of the Bass transducer- $24.99 US plus $4.00 US for shipping

 PayPal- the safest way to shop


6 LED gun light set

A set of 6 bright orange 5mm LED lights that are pre-wired for plug in use on the V4 and V4.1 card. Simply plug them in, and the light flashes synchronized with the gun sound on the Aux. 1 channel. (labeled servo 2 on the board)

Price of the 6 LED gun light set- $23.99 US plus $3.00 US for shipping




Safety and security with PayPal





8
LED gun light set

A set of 8 bright orange 5mm LED lights that are pre-wired for plug in use on the V4 and V4.1 card. Simply plug them in, and the light flashes synchronized with the gun sound on the Aux. 1 channel. (labeled servo 2 on the board)

Price of the 8 LED gun light set- $26.99 US plus $3.00 US for shipping




Safety and security with PayPal




Ferrite Choke

RECOMMENDED ITEM for V4! Not required for V4.1 Sound Unit. If your ESC/BEC does not already have a ferrite choke on it, it may be a good idea. The sound unit can pick up RF interference that may cause the sound to cut out, or cause other sound issues. This little device prevents that. The best location I have found is on the RX end of the servo Y cable that goes between the ESC and the sound unit. Wrap the wire around it a few times, and it will prevent any RF caused sound glitching.

Price of the Ferrite Choke- $2.89US plus $1.50US for shipping




Affiliate Statement

  Some of the links on this page are “affiliate links.” This means if you click on the link and purchase the item, I will receive a  small affiliate commission. There is no extra cost to you. Because my integrity and your satisfaction are very important to me,  I only recommend products or services I use personally or would purchase, and believe will benefit my readers. This income is used to help pay for this site. I am disclosing this in accordance with the Federal Trade Commission’s 16 CFR, Part 255: “Guides Concerning the Use of Endorsements and Testimonials in Advertising" For further information, please click here.



› Mr RC Sound Accessories