The CWcopter VTquad quadcopter

The latest quadcopter by CWcopter. Lots of fun and RC aerobatics and easy to fly. Available as a BNF or in kit form. Use PayPal to buy with confidence.

CW VT Quad flying

If you are looking for fun in the RC helicopter world then look no further than right here!

The VT Quad was designed from the start to be aerobatic and fun and at the same time, easy to fly.

The KK2 board has been flashed with firmware that only works with a DSM2 satellite receiver and transmitter (Spektrum). If you prefer a standard receiver and Futaba S-bus compatibility, please contact us when you place the order and we can supply the correct firmware.

For ease of transport, you will notice that the side arms can be folded back, making a very compact package. Fixed wing pilots will be glad to learn that this quadcopter controls much the same as a fixed wing RC airplane.


The CWcopter VTQuad flying

Videos of the VTQuad Quadcopter

This quad is available in 3 types of kit-

  •  The BNF which is 100% assembled and has been test flown prior to shipment and just requires binding to your DSM2 or DSMX transmitter.
  • A full kit that contains all the components required.                                                               
  • An airframe only kit.

BNF (Bind and fly) version contents:

  • Fully assembled and ready to be bound to your transmitter ( 4-channel min. Spekrtum compatible)
  • 1-KK2.0 Multi-rotor control board                                                                
  • 4-Turnigy outrunner brushless motors-1400Kv
  • 4-SimonK 30A ESCs
  • Test flown prior to shipment

 

 

Price of complete CWcopter VTquad BNF- $359.00 US plus $15.00 US for shipping.
Safe and secure shopping with PayPal.

Solution Graphics

 


Full kit contents:

  • 1-KK2.0 Multi-rotor control board                                                                
  • 4-Turnigy outrunner brushless motors-1400Kv
  • 4-SimonK 30A ESCs
  • 1-Power distribution harness
  •  3- CNC machined Delrin fuselage mounting plates
  • 1- molded landing gear set
  • 1-Foam canopy
  • 6- tractor and pusher props (2-spare)
  • 4-Delrin motor mounting plates
  • Complete hardware package
  • Suitable cable ties
The CWcopter VT Quad kit contents

Extra components required:

  • DSM2 compatible satellite receiver unit (Spektrum, Orange Rx, Lemon etc) Note that the KK2 board will not work with a standard multi-channel receiver. Standard receiver and Futaba S-bus compatibility can be requested at time of order.
  • 3S battery, 2200mAh
  • Or 4S battery, 2200mAh


Price of complete CWcopter VTquad full kit- $295.00 US plus $15.00 US for shipping.
Safe and secure shopping with PayPal.

Solution Graphics


 Airframe only kit contents:

  •  3- CNC machined Delrin fuselage mounting plates
  • 1- molded landing gear set
  • 4-Delrin motor mounting plates
  • 2-Motor mounting arms
  • 1-VT tail boom
  • 1-Foam canopy
Price of complete CWcopter VTquad Airframe only kit- $99.00 US plus $15.00 US for shipping.
Safe and secure shopping with PayPal.

Solution Graphics


Ordering information

  • The VTQuad is made by CWcopter and assembled, in the US, by the designer, Chris Wilson.
  • RC Airplanes Simplified is a reseller of these quadcopters and any questions regarding the units or for shipping details Contact us
  •  If you order through this site, you will receive an e-mail order receipt from PayPal
  •  Shipping is by the USPS and is a flat rate of $15.00USD. This rate applies to the USA. For international shipping costs, please Contact us
  • Please note that you do not need a PayPal account-your credit card will work just fine!

CWcopter Tricopter


For information on the simpler CWcopter Tricopter click here






New! Comments

Have your say about what you just read! Leave me a comment in the box below.